2009 Yamaha Motorsports Grizzly 700 FI Auto. 4x4 EPS Ducks Unlimited Edition O - Page 138

EBU24071 1 (b) (a) 2 3 Adjusting the drive select lever safety system cable 2WD 4WD The drive select lever safety system cable stretches with use, which can result in improper function. Therefore, the safety system cable should be checked and adjusted by a Yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart. 4 1. 2. 3. 4. Rubber cover Throttle cable free play adjusting bolt Locknut Throttle cable free play EBU27470 Checking the front and rear brake pads The front and rear brake pads must be checked for wear at the intervals specified in the periodic maintenance and lubrication chart. Each brake pad is provided with a wear indicator groove, which allows you to check the brake pad wear without having to disassemble the brake. If a brake pad has worn to the point that the wear indicator groove has almost disappeared, have a Yamaha dealer replace the brake pads as a set. TIP The wheels need to be removed to check the brake pads. (See page 8-64.) 8 4. Tighten the locknut. 5. Slide the rubber cover to its original position. EBU24060 Valve clearance The valve clearance changes with use, resulting in improper air-fuel mixture and/or engine noise. To prevent this from occurring, the valve clearance must be adjusted by a Yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart. 8-45