2009 Yamaha Motorsports Big Bear 250 Owners Manual - Page 120
2009 Yamaha Motorsports Big Bear 250 Manual
Page 120 highlights
EWB02020 EBU24760 WARNING POTENTIAL HAZARD Operating with improperly serviced or adjusted brakes. WHAT CAN HAPPEN You could lose braking ability, which could lead to an accident. HOW TO AVOID THE HAZARD After servicing: G Make sure the brakes operate smoothly and that the free play is correct. G Make sure the brakes do not drag. Replacement of brake components requires professional knowledge. These procedures should be performed by a Yamaha dealer. EBU24230 Brake light switches The operation of the brake light switches must be checked and, if necessary, adjusted at the intervals specified in the periodic maintenance and lubrication chart. The brake light switch for the brake pedal can be adjusted as follows, but the other brake light switches should be adjusted by a Yamaha dealer. 1. Remove the footboard. (See "Engine oil" on page 8-10 for removal and installation procedures.) TIP The brake light switch is properly adjusted when the brake light comes on just before braking takes effect. 2. Turn the adjusting nut while holding the brake light switch in place. To make the brake light come on earlier, turn the adjusting nut in direction (a). To make the brake light come on later, turn the adjusting nut in direction (b). 8 Axle boots The axle boots must be checked for damage at the intervals specified in the periodic maintenance and lubrication chart. Check the axle boots for tears or damage. If any damage is found, have them replaced by a Yamaha dealer. 8-33