2009 Yamaha Motorsports Big Bear 250 Owners Manual - Page 101
2009 Yamaha Motorsports Big Bear 250 Manual
Page 101 highlights
13. Install the oil strainer, compression spring, Oring and engine oil drain bolt, and then tighten the engine oil drain bolt to the specified torque. ECB00320 NOTICE Before installing the engine oil drain bolt, be sure to install the O-ring, compression spring and oil strainer. Tightening torque: Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31 ft·lbf) 14. Refill with the specified amount of the recommended engine oil, and then install and tighten the engine oil filler cap. Recommended oil: See page 10-1. Oil quantity: Without oil filter element removal: 1.50 L (1.59 US qt, 1.32 Imp.qt) With oil filter element removal: 1.60 L (1.69 US qt, 1.41 Imp.qt) 8 1. Oil filter element 2. O-ring 10. Check the O-ring for damage and replace it if necessary. 11. Install the oil filter element and the O-ring. TIP Make sure that the O-ring is properly seated. 12. Install the oil filter element cover by installing the bolts, and then tighten them to the specified torque. Tightening torque: Oil filter element cover bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 8-14