2008 Yamaha Motorsports V Star Custom Owners Manual - Page 53

2008 Yamaha Motorsports V Star Custom Manual

Get 2008 Yamaha Motorsports V Star Custom PDF manuals and user guides View all 2008 Yamaha Motorsports V Star Custom manuals

Page 53 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR Tightening torque: Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31 ft·lbf) 9. Add the specified amount of the recommended oil, and then install and tighten the oil filler cap. Recommended engine oil: See page 8-1. Oil quantity: Without oil filter element replacement: 2.60 L (2.75 US qt) (2.29 Imp.qt) With oil filter element replacement: 2.80 L (2.96 US qt) (2.46 Imp.qt) 1. Outer oil filter element cover 2. Bolt 1. Oil filter element 2. O-ring 6. Install a new oil filter element and the O-ring. 7. Install the oil filter element covers by installing the bolts, and then tighten them to the specified torque. Tightening torque: Oil filter element cover bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 1. Inner oil filter element cover 2. Bolt 6 NOTE: Be sure to wipe off spilled oil on any parts after the engine and exhaust system have cooled down. ECA11620 CAUTION: 8. Install the engine oil drain bolt, and then tighten it to the specified torque. NOTE: Check the washer for damage and replace it if necessary. 6-12 G 5. Remove the oil filter element and O-ring. In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives. Do not use oils with a diesel specification of "CD" or oils of a high-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
PERIODIC MAINTENANCE AND MINOR REPAIR
6-12
6
5.
Remove the oil filter element and
O-ring.
6.
Install a new oil filter element and
the O-ring.
7.
Install the oil filter element covers
by installing the bolts, and then
tighten them to the specified
torque.
8.
Install the engine oil drain bolt, and
then tighten it to the specified
torque.
NOTE:
Check the washer for damage and re-
place it if necessary.
9. Add the specified amount of the
recommended oil, and then install
and tighten the oil filler cap.
NOTE:
Be sure to wipe off spilled oil on any
parts after the engine and exhaust sys-
tem have cooled down.
CAUTION:
ECA11620
●
In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives. Do
not use oils with a diesel speci-
fication of “CD” or oils of a high-
1.
Outer oil filter element cover
2. Bolt
1.
Inner oil filter element cover
2. Bolt
1.
Oil filter element
2. O-ring
Tightening torque:
Oil filter element cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Tightening torque:
Engine oil drain bolt:
43 Nm (4.3 m·kgf, 31 ft·lbf)
Recommended engine oil:
See page 8-1.
Oil quantity:
Without oil filter element replace-
ment:
2.60 L (2.75 US qt) (2.29 Imp.qt)
With oil filter element replacement:
2.80 L (2.96 US qt) (2.46 Imp.qt)