2008 Yamaha Motorsports V Star 1300 Owners Manual - Page 72

2008 Yamaha Motorsports V Star 1300 Manual

Page 72 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR EAU24131 EAU42460 Replacing the tail/brake light bulb 1. Remove the tail/brake light lens by removing the screws. Replacing a front turn signal light bulb 1. Remove the front turn signal light outer lens by removing the screws. 9. Have a Yamaha dealer adjust the headlight beam if necessary. 6 1. Screw 1. Screw 2. Remove the defective bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. ECA10680 2. Remove the inner lens by pulling it out. CAUTION: Do not overtighten the screws, otherwise the lens may break. 6-33 1. Inner lens

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98

PERIODIC MAINTENANCE AND MINOR REPAIR
6-33
6
9.
Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU24131
Replacing the tail/brake light
bulb
1.
Remove the tail/brake light lens by
removing the screws.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3.
Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
ECA10680
Do not overtighten the screws, oth-
erwise the lens may break.
EAU42460
Replacing a front turn signal
light bulb
1.
Remove the front turn signal light
outer lens by removing the screws.
2.
Remove the inner lens by pulling it
out.
1. Screw
1. Screw
1.
Inner lens