2008 Yamaha Motorsports Road Star S Owners Manual - Page 83
2008 Yamaha Motorsports Road Star S Manual
Page 83 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR EAU24181 EAU24210 Tail/brake light This model is equipped with an LEDtype tail/brake light. If the tail/brake light does not come on, have a Yamaha dealer check it. Replacing a turn signal light bulb 1. Remove the turn signal lens by removing the screws. 1. Do not touch the glass part of the bulb. 1 5. Install the headlight bulb cover, and then connect the coupler. 6. Install the headlight unit by installing the screws. 7. Have a Yamaha dealer adjust the headlight beam if necessary. 1. Screw 6 2. Remove the defective bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. ECA10680 CAUTION: Do not overtighten the screws, otherwise the lens may break. 6-37