2008 Yamaha Motorsports Road Star S Owners Manual - Page 25
2008 Yamaha Motorsports Road Star S Manual
Page 25 highlights
INSTRUMENT AND CONTROL FUNCTIONS Clock 6. Push the "RESET" switch and then release it to start the clock. ECA11590 CAUTION: If the display indicates an error code, the vehicle should be checked as soon as possible in order to avoid engine damage. 1 Self-diagnosis device 1 Brightness control mode 3 1. Clock The clock displays when the key is turned to "ON". To set the clock 1. Turn the key to "ON". 2. Push the " " side of the "SELECT" switch and "RESET" switch together for at least two seconds. 3. When the hour digits start flashing, push the " " or " " side of the "SELECT" switch to set the hours. 4. Push the "RESET" switch, and the minute digits will start flashing. 5. Push the " " or " " side of the "SELECT" switch to set the minutes. 1 1. Error code display 2 This model is equipped with a self-diagnosis device for various electrical circuits. If any of those circuits are defective, the engine trouble warning light will come on or flash, and then the display will indicate a two-digit error code. If the display indicates any error codes, note the code number, and then have a Yamaha dealer check the vehicle. 1. Speedometer panel 2. Brightness level This function allows you to adjust the brightness of the speedometer panel to suit the outside lighting conditions. To set the brightness 1. Turn the key to "OFF". 2. Push and hold the " " side of the "SELECT" switch. 3-5