2008 Yamaha Motorsports Grizzly 700 4x4 Owners Manual - Page 151
2008 Yamaha Motorsports Grizzly 700 4x4 Manual
Page 151 highlights
ECB00640 EWB02151 CAUTION: To prevent accidental short-circuiting, turn off the main switch when checking or replacing a fuse. 2. Remove the blown fuse, and then install a new fuse of the specified amperage. Specified fuses: Main fuse: 40.0 A Headlight fuse: 15.0 A Ignition fuse: 10.0 A Four-wheel-drive motor fuse: 10.0 A Signaling system fuse: 5.0 A Auxiliary DC jack fuse: 15.0 A Radiator fan fuse: 15.0 A Fuel injection system fuse: 15.0 A 8-58 WARNING POTENTIAL HAZARD Using an improper fuse. WHAT CAN HAPPEN An improper fuse can cause damage to the electrical system, which could lead to a fire. HOW TO AVOID THE HAZARD Always use a fuse of the specified rating. Never use a material in place of the proper fuse. 3. Turn the key to "ON" and turn on the electrical circuits to check if the devices operate. 4. If the fuse immediately blows again, have a Yamaha dealer check the electrical system. EBU27430 8 Replacing a headlight bulb If a headlight bulb burns out, replace it as follows. 1. Remove the cover at the rear of the headlight by pulling it off.