2008 Yamaha Motorsports Grizzly 700 4x4 Owners Manual - Page 129

2008 Yamaha Motorsports Grizzly 700 4x4 Manual

Get 2008 Yamaha Motorsports Grizzly 700 4x4 PDF manuals and user guides View all 2008 Yamaha Motorsports Grizzly 700 4x4 manuals

Page 129 highlights

Tightening torque: Water pump air bleed bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 15. Remove panel E. (See page 8-8.) 16. Loosen the clamp screw, and then remove the V-belt cooling duct. 1. Cylinder head air bleed bolt 18. When coolant begins to flow out of the bolt hole, tighten the cylinder head air bleed bolt to the specified torque. Tightening torque: Cylinder head air bleed bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 19. Start the engine and let it idle for ten minutes. 20. Rev the engine five times. 21. Pour the recommended coolant into the radiator until it is full. 8 1. V-belt cooling duct 2. Clamp screw 17. Loosen the cylinder head air bleed bolt, without removing it, to allow all of the air to escape from the air bleed bolt hole. 8-36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
8-36
8
15.
Remove panel E. (See page 8-8.)
16.
Loosen the clamp screw, and then remove the
V-belt cooling duct.
17.
Loosen the cylinder head air bleed bolt, with-
out removing it, to allow all of the air to escape
from the air bleed bolt hole.
18. When coolant begins to flow out of the bolt
hole, tighten the cylinder head air bleed bolt to
the specified torque.
19.
Start the engine and let it idle for ten minutes.
20.
Rev the engine five times.
21.
Pour the recommended coolant into the radia-
tor until it is full.
Tightening torque:
Water pump air bleed bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
1.
V-belt cooling duct
2.
Clamp screw
1.
Cylinder head air bleed bolt
Tightening torque:
Cylinder head air bleed bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)