2008 Yamaha Motorsports Grizzly 350 4x4 Owners Manual - Page 22
2008 Yamaha Motorsports Grizzly 350 4x4 Manual
Page 22 highlights
EBU17952 EBU18080 On-Command four-wheel-drive indicator light " " This indicator light comes on when the On-Command four-wheel-drive switch is set to the "4WD" position. NOTE: Due to the synchronizing mechanism in the differential gear case, the light may not come on until the ATV starts moving. EBU18061 Engine stop switch " / " Set this switch to " " before starting the engine. The engine stop switch controls the ignition and stops the engine when it is running. Use this switch to stop the engine in an emergency situation. The engine will not start or run when this switch is set to " ". EBU18100 4 Start switch " " Push this switch to crank the engine with the starter. ECB00050 Handlebar switches CAUTION: See the starting instructions on page 6-1 prior to starting the engine. EBU18151 Light switch " / /OFF" Set this switch to " " to turn on the low beams and the taillight. Set the switch to " " to turn on the high beams and the taillight. Set the switch to "OFF" to turn off all the lights. 1. Light switch " / 2. Engine stop switch " 3. Start switch " " /OFF" / " 4-3