2008 Yamaha Motorsports FX Nytro Owners Manual - Page 72
2008 Yamaha Motorsports FX Nytro Manual
Page 72 highlights
Periodic maintenance ESU12861 Adjusting the headlight beams 1. 2. Remove the shroud. (See page 43 for removal procedures.) Turn the headlight beam adjusting screw in or out to adjust the headlight beams. To lower the headlight beams, turn the headlight beam adjusting screw in direction (a). To raise the headlight beams, turn the headlight beam adjusting screw in direction (b). 1. Bulb holder 5. 6. Remove the bulb. Install the new bulb, and then hook the bulb holder onto the headlight unit. Bulb type: Halogen bulb ECS00620 CAUTION: Keep oil and your hands away from the glass part of the bulb or its life and illumination will be affected. If the glass is oil stained, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner. 1. Headlight beam adjusting screw 3. Install the shroud. ESU12290 Fittings and fasteners Check the tightness of the fittings and fasteners. Tighten in proper sequence and torque if necessary. ESU12300 Battery This snowmobile is equipped with a sealedtype (MF) battery, which does not require any maintenance. There is no need to check the electrolyte or to add distilled water. To charge the battery 1. Do not touch the glass part of the bulb. 7. 8. Install the bulb holder cover, and then connect the headlight coupler. Install the shroud. Have a Yamaha dealer charge the battery as soon as possible if it seems to have discharged. Keep in mind that the battery tends to discharge more quickly if the snowmobile is equipped with electrical accessories. 66