2008 Yamaha Motorsports FX Nytro Owners Manual - Page 43
2008 Yamaha Motorsports FX Nytro Manual
Page 43 highlights
Operation 2. 3. 4. 5. Press the throttle lever slowly to move the snowmobile. Turn the handlebar in the desired direction. Squeeze the brake lever to stop the snowmobile. Apply the parking brake by moving the parking brake lever to the left. 1. Pull out. 2. Slide to "REV" (reverse). 3. Push in. ECS00070 FX10 / FX10RTR / FX10RTRA / FX10MTR / FX10MTRA EWS00310 WARNING G G G G Make sure that the throttle lever is fully released and the snowmobile is at a full stop before shifting. Be sure to slide the shift lever to "FWD" or "REV" until it stops completely and only while the engine is idling. Make sure that the area behind the snowmobile is clear before reversing. Watch behind. Reduce speed and avoid sharp turning when operating the snowmobile in reverse. To select the desired operating position, pull the shift lever out, slide it to "FWD" or to "REV" until it stops, and then push it back in. CAUTION: Do not shift from "FWD" to "REV" or from "REV" to "FWD" while the snowmobile is moving. Otherwise, the drive system could be damaged. NOTE: The reverse buzzer beeps while the shift lever is in reverse. 2. Release the parking brake by moving the parking brake lever to the right. 1. 3. 4. 1. Pull out. 2. Slide to "FWD" (forward). 3. Push in. 5. Press the throttle lever slowly to move the snowmobile. Turn the handlebar in the desired direction. Squeeze the brake lever to stop the snowmobile. 37