2008 Yamaha Motorsports FX Nytro MTX Owners Manual - Page 56
2008 Yamaha Motorsports FX Nytro MTX Manual
Page 56 highlights
Periodic maintenance 7. Insert the dipstick into the oil filler hole, and then tighten the oil filler cap. 8. Connect the oil level gauge coupler. 9. Install the right side cover and the shroud. To change the engine oil (with or without oil filter cartridge replacement) 1. Place the snowmobile on a level surface and apply the parking brake. 2. Start the engine, warm it up for several minutes, and then turn it off. 3. Remove the shroud, the left side cover, and the right side cover. (See page 43 for removal procedures.) 4. Remove the left lower cover, the right lower cover, and the bottom panel. 1. Bottom panel 2. Quick fastener 5. 6. Place an oil pan under the oil tank to collect the used oil. Disconnect the oil level gauge coupler. 1. Left lower cover 2. Quick fastener 3. Bolt 1. Oil level gauge coupler 2. Oil filler cap 7. Remove the oil filler cap, cylinder head cap, and drain bolt to drain the oil from the oil tank. 1. Right lower cover 2. Quick fastener 3. Bolt 1. Cylinder head cap 50