2008 Yamaha Motorsports FX Nytro MTX Owners Manual - Page 49
2008 Yamaha Motorsports FX Nytro MTX Manual
Page 49 highlights
Periodic maintenance ESU12770 Tool kit The owner's tool kit has the tools which are sufficient for most periodic maintenance and minor repairs. A torque wrench is also necessary to properly tighten nuts and bolts. 1. Fastener 1. Tool kit ECS00760 CAUTION: Before starting the engine, make sure that the storage pouch zipper is closed completely. 1. Shroud NOTE: If you do not have a torque wrench available during a service operation requiring one, take your snowmobile to a Yamaha dealer to check the torque settings and adjust them if necessary. ESU12780 To install the shroud Hook the end of the shroud onto the front cover, insert the projections on the shroud into the slots in the headlight stay, and then tighten the fasteners. Removing and installing the shroud and covers Shroud To remove the shroud Loosen the fasteners, and then slide the shroud forward. Left and right side covers To remove a side cover 1. Remove the shroud. (See above for removal procedures.) 43