2008 Yamaha Motorsports C3 Owners Manual - Page 42
2008 Yamaha Motorsports C3 Manual
Page 42 highlights
Coolant PERIODIC MAINTENANCE AND MINOR REPAIR 1 Tightening torque: Final transmission oil filler bolt: 23 Nm (2.3 m • kgf, 16.6 ft • lbf) Recommended final transmission oil: See page 8-1. Oil quantity: 0.10 L (0.11 US qt) (0.09 Imp.qt) EWA11310 EAU17226 EAU20070 Coolant The coolant level should be checked before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. EAUT1521 1 2 3 4 5 6 7 8 9 2 ZAUM00** 1. Final transmission oil filler bolt 2. Final transmission oil drain bolt w ● 4. Remove the oil filler bolt and drain bolt to drain the oil from the final transmission case. 5. Install the final transmission oil drain bolt, and then tighten it to the specified torque. Tightening torque: Final transmission oil drain bolt: 13 Nm (1.3 m • kgf, 9.4 ft • lbf) ● Make sure that no foreign material enters the final transmission case. Make sure that no oil gets on the tire or wheel. 7. Check the final transmission case for oil leakage. If oil is leaking, check for the cause. 6. Add the specified amount of the recommended final transmission oil, and then install the oil filler bolt and tighten it to the specified torque. To check the coolant level The coolant level should be checked as follows before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. 1. Place the vehicle on the centerstand. NOTE: ● The coolant level must be checked on a cold engine since the level varies with engine temperature. ● Make sure that the vehicle is positioned straight up when checking the coolant level. A slight tilt to the side can result in a false reading. 2. Check the coolant level in the coolant reservoir. 6-11