2008 Yamaha Motorsports Big Bear 400 4x4 IRS Owners Manual - Page 42
2008 Yamaha Motorsports Big Bear 400 4x4 IRS Manual
Page 42 highlights
EWB00350 WARNING POTENTIAL HAZARD Improper shock absorber assembly adjustment. WHAT CAN HAPPEN Uneven adjustment can cause poor handling and loss of stability, which could lead to an accident. HOW TO AVOID THE HAZARD Always adjust the shock absorber assemblies on the left and right side to the same setting. EBU19180 4 1. Auxiliary DC jack 2. Auxiliary DC jack cap Auxiliary DC jack The auxiliary DC jack is located at the front right side of the ATV. The auxiliary DC jack can be used for suitable work lights, radios, etc. The auxiliary DC jack should only be used when the engine is running. 1. Set the light switch to "OFF". 2. Start the engine. (See page 6-1.) 3. Open the auxiliary DC jack cap, and then insert the accessory power plug into the jack. Maximum rated capacity for the auxiliary DC jack: DC 12 V, 120 W (10 A) 4. When the auxiliary DC jack is not being used, cover it with the cap. ECB00120 CAUTION: G Do not use accessories requiring more than the above maximum capacity. This may overload the circuit and cause the fuse to blow. 4-23