2008 Yamaha Motorsports Big Bear 400 4x4 IRS Owners Manual - Page 128
2008 Yamaha Motorsports Big Bear 400 4x4 IRS Manual
Page 128 highlights
NOTE: When tightening the locknut, hold the adjusting screw with a screwdriver so that the adjusting screw does not turn together with the locknut. EBU24890 Checking and lubricating the cables The operation and the condition of all control cables should be checked before each ride, and the cables and cable ends should be lubricated if necessary. If a cable is damaged or does not move smoothly, have a Yamaha dealer check or replace it. Recommended lubricant: Engine oil EWB02120 1. Locknut 2. Clutch adjusting screw 8 NOTE: Turning the adjusting screw out decreases clutch free play and turning it in increases clutch free play. 3. Tighten the locknut to the specified torque. Tightening torque: Locknut: 20 Nm (2.0 m·kgf, 14 ft·lbf) WARNING POTENTIAL HAZARD Damaged control cables. 8-36