2007 Yamaha Motorsports VMAX Owners Manual - Page 76
2007 Yamaha Motorsports VMAX Manual
Page 76 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR EAU24360 Front wheel EAU24430 1 2 3 1. Tail/brake light bulb To remove the front wheel EWA10820 G G 4 5 6 7 8 9 WARNING It is advisable to have a Yamaha dealer service the wheel. Securely support the motorcycle so that there is no danger of it falling over. 2. Remove the defective bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. ECA10680 1. Place the motorcycle on the centerstand. 2. Disconnect the speedometer cable from the front wheel. 3. Remove the brake calipers by removing the bolts. ECA11060 1. Speedometer cable 2. Bolt 3. Front wheel axle pinch bolt 4. Wheel axle 5. Pull the wheel axle out, and then remove the wheel. EAU24842 CAUTION: Do not overtighten the screws, otherwise the lens may break. CAUTION: Do not pull the brake lever after the brake caliper has been removed, otherwise the brake pads will be forced shut. 4. Loosen the front wheel axle pinch bolt, then the wheel axle. To install the front wheel 1. Install the speedometer gear unit into the wheel hub so that the projections mesh with the slots. 6-36