2007 Yamaha Motorsports VMAX Owners Manual - Page 26
2007 Yamaha Motorsports VMAX Manual
Page 26 highlights
INSTRUMENT AND CONTROL FUNCTIONS 2. Place the rider seat in the original position, and then tighten the bolts and screws. 1 2 3 4 5 6 7 8 9 NOTE: Make sure that the seat is properly secured before riding. 3. Return the rider seat backrest to the original position. EAU14281 EAU14660 Helmet holder Adjusting the front fork This front fork is equipped with air valves for adjusting the spring rate. EWA10180 WARNING Always adjust both fork legs equally, otherwise poor handling and loss of stability may result. Adjust the spring rate as follows. 1. Elevate the front wheel by placing the vehicle on the centerstand. NOTE: When checking and adjusting the air pressure, there should be no weight on the front end of the vehicle. 2. Remove the air valve cap from each fork leg. 1. Helmet holder 2. Unlock. To open the helmet holder, insert the key into the lock, and then turn the key as shown. To lock the helmet holder, place it in the original position, and then remove the key. EWA10160 WARNING Never ride with a helmet attached to the helmet holder, since the helmet may hit objects, causing loss of control and possibly an accident. 3-10