2007 Yamaha Motorsports Road Star Midnight Owners Manual - Page 83

2007 Yamaha Motorsports Road Star Midnight Manual

Page 83 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR EAU24180 EAU24210 EAU31961 Tail/brake light This model is equipped with an LED type of tail/brake light. If the tail/brake light does not come on, have a Yamaha dealer check it. Replacing a turn signal light bulb 1. Remove the turn signal lens by removing the screws. Replacing a license plate light bulb 1. Remove the license plate light unit by removing the bolts. 1. Screw 1. Bolt 6 2. Remove the defective bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. ECA10680 2. Remove the license plate light socket (together with the bulb) by turning it counterclockwise, and then pulling it out. CAUTION: Do not overtighten the screws, otherwise the lens may break. 6-37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107

PERIODIC MAINTENANCE AND MINOR REPAIR
6-37
6
EAU24180
Tail/brake light
This model is equipped with an LED
type of tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
EAU24210
Replacing a turn signal light
bulb
1.
Remove the turn signal lens by re-
moving the screws.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3.
Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
ECA10680
Do not overtighten the screws, oth-
erwise the lens may break.
EAU31961
Replacing a license plate light
bulb
1.
Remove the license plate light unit
by removing the bolts.
2. Remove the license plate light
socket (together with the bulb) by
turning it counterclockwise, and
then pulling it out.
1. Screw
1. Bolt