2007 Yamaha Motorsports RS Rage GT Owners Manual - Page 80
2007 Yamaha Motorsports RS Rage GT Manual
Page 80 highlights
E_8gg.book Page 25 Thursday, March 16, 2006 4:23 PM WARNING @ This shock absorber contains highly pressurized nitrogen gas. It could explode by improper handling, causing injury, or property damage. G Do not tamper with or attempt to open the shock absorber. G Do not subject the shock absorber to an open flame or other high heat source, which could cause it to explode. G Do not deform or damage the shock absorber in any way. G Do not dispose of a worn or damaged shock absorber by yourself. Take the unit to a Yamaha dealer. @ ESU04045 Adjusting the rear suspension spring preload The rear suspension spring preload can be adjusted by turning the spring preload adjuster 1 on the shock absorber (RS90R/RS90GT/RSG90/RSG90GT) or each shock absorber (RS90N/RS90NR/RS90M/RS90MS). A For RS90N/RS90NR CD-17E Spring seat length* Preload È a Length (front) Standard Increased Harder Decreased → Softer Maximum Minimum 123.5 mm 113.5 mm 107.5 mm (4.86 in) (4.47 in) (4.23 in) ∗ The spring seat length changes approximately 1.5 mm (0.06 in) with each full turn of the adjuster. B For RS90M/RS90MS CD-13E Spring adjuster position Preload É Standard (front) 1 Soft 2 3 3 4 5 Hard 8-25