2007 Yamaha Motorsports Grizzly 660 Auto. 4x4 Owners Manual - Page 146
2007 Yamaha Motorsports Grizzly 660 Auto. 4x4 Manual
Page 146 highlights
7. Install the bulb holder cover and the cover at the rear of the headlight. ECB00670 CAUTION: Make sure the headlight bulb holder cover is securely fitted over the bulb holder and seated properly. 8. Adjust the headlight beam if necessary. EBU25550 Adjusting a headlight beam ECB00690 1. Headlight beam adjusting screw EBU25640 CAUTION: It is advisable to have a Yamaha dealer make this adjustment. 8 To raise a headlight beam, turn the adjusting screw in direction (a). To lower a headlight beam, turn the adjusting screw in direction (b). Replacing the tail/brake light bulb If the tail/brake light bulb burns out, replace it as follows. 1. Remove panel G. (See page 8-9.) 2. Remove the bulb holder (together with the bulb) by turning it counterclockwise. 8-53