2007 Yamaha Motorsports Grizzly 660 Auto. 4x4 Owners Manual - Page 113
2007 Yamaha Motorsports Grizzly 660 Auto. 4x4 Manual
Page 113 highlights
NOTE: Skip steps 6-10 if the oil filter cartridge is not being replaced. 6. Remove panels D and E. (See page 8-9.) 7. Remove the oil filter cartridge with an oil filter wrench. 1. O-ring NOTE: Make sure that the O-ring is properly seated. 9. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the specified torque with a torque wrench. 8 1. Oil filter cartridge 2. Oil filter wrench NOTE: An oil filter wrench is available at a nearby Yamaha dealer. 8. Apply a thin coat of engine oil to the O-ring of the new oil filter cartridge. 8-20
8-20
8
NOTE:
Skip steps 6–10 if the oil filter cartridge is not being
replaced.
6.
Remove panels D and E. (See page 8-9.)
7.
Remove the oil filter cartridge with an oil filter
wrench.
NOTE:
An oil filter wrench is available at a nearby Yamaha
dealer.
8.
Apply a thin coat of engine oil to the O-ring of
the new oil filter cartridge.
NOTE:
Make sure that the O-ring is properly seated.
9.
Install the new oil filter cartridge with an oil fil-
ter wrench, and then tighten it to the specified
torque with a torque wrench.
1.
Oil filter cartridge
2.
Oil filter wrench
1. O-ring