2007 Yamaha Motorsports Big Bear 250 Owners Manual - Page 127

2007 Yamaha Motorsports Big Bear 250 Manual

Page 127 highlights

3. Turn the key to "ON" and turn on the electrical circuits to check if the devices operate. 4. If the fuse immediately blows again, have a Yamaha dealer check the electrical system. EBU26892 Replacing a headlight bulb If a headlight bulb burns out, replace it as follows. 1. Remove the bulb holder cover at the rear of the headlight by pulling it off. 1. Headlight coupler 3. Remove the headlight bulb holder assembly by turning it counterclockwise. 8 1. Headlight bulb holder cover 2. Disconnect the headlight coupler by lifting the tab as shown and pulling out the coupler. 1. Headlight bulb holder assembly 8-42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155

8-42
8
3.
Turn the key to “ON” and turn on the electrical
circuits to check if the devices operate.
4.
If the fuse immediately blows again, have a
Yamaha dealer check the electrical system.
EBU26892
Replacing a headlight bulb
If a headlight bulb burns out, replace it as follows.
1.
Remove the bulb holder cover at the rear of
the headlight by pulling it off.
2.
Disconnect the headlight coupler by lifting the
tab as shown and pulling out the coupler.
3.
Remove the headlight bulb holder assembly
by turning it counterclockwise.
1.
Headlight bulb holder cover
1.
Headlight coupler
1.
Headlight bulb holder assembly