2007 Yamaha Motorsports Big Bear 250 Owners Manual - Page 102

2007 Yamaha Motorsports Big Bear 250 Manual

Get 2007 Yamaha Motorsports Big Bear 250 PDF manuals and user guides View all 2007 Yamaha Motorsports Big Bear 250 manuals

Page 102 highlights

To change the final gear oil 1. Remove the final gear case guard by removing the bolts. 1. Final gear oil 2. Correct oil level 3. Final gear oil filler bolt 8 3. If the oil is below the brim of the filler hole, add sufficient oil of the recommended type to raise it to the correct level. 4. Install the oil filler bolt, and then tighten it to the specified torque. Tightening torque: Final gear oil filler bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) 1. Final gear case cover 2. Bolt 2. Place the ATV on a level surface. 3. Place an oil pan under the final gear case to collect the used oil. 4. Remove the final gear oil filler bolt and the final gear oil drain bolt to drain the oil from the final gear case. 8-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
8-17
8
3.
If the oil is below the brim of the filler hole, add
sufficient oil of the recommended type to raise
it to the correct level.
4.
Install the oil filler bolt, and then tighten it to the
specified torque.
To change the final gear oil
1.
Remove the final gear case guard by remov-
ing the bolts.
2.
Place the ATV on a level surface.
3.
Place an oil pan under the final gear case to
collect the used oil.
4.
Remove the final gear oil filler bolt and the fi-
nal gear oil drain bolt to drain the oil from the
final gear case.
1.
Final gear oil
2.
Correct oil level
3.
Final gear oil filler bolt
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
1.
Final gear case cover
2. Bolt