2007 Yamaha Motorsports Attak GT Owners Manual - Page 78
2007 Yamaha Motorsports Attak GT Manual
Page 78 highlights
ESU04670 Adjusting the rear suspension spring preload The rear suspension spring preload can be adjusted by turning the spring preload adjuster 1 on the shock absorber. A For RX10GT CD-17E Spring seat length* Preload È a Length (front) Standard Increased Harder Decreased → Softer Maximum Minimum 141.5 mm 131.5 mm 120.5 mm (5.57 in) (5.18 in) (4.74 in) ∗ The spring seat length changes approximately 1.5 mm (0.06 in) with each full turn of the adjuster. For RXW10GT CD-17E Spring seat length* Preload È a Length (front) Standard Increased Harder Decreased → Softer Maximum Minimum 138.5 mm 128.5 mm 120.5 mm (5.45 in) (5.06 in) (4.74 in) ∗ The spring seat length changes approximately 1.5 mm (0.06 in) with each full turn of the adjuster. NOTE: @ The rear suspension spring preload can be further adjusted by changing the position of the spring seat. Have a Yamaha dealer make this adjustment as it requires special tools. @ WARNING @ Be sure to have a Yamaha dealer make this adjustment. This shock absorber contains highly pressurized nitrogen gas. It could explode by improper handling, causing injury or property damage. G Do not tamper with or attempt to open the shock absorber. G Do not subject the shock absorber to an open flame or other high heat sources, which could cause it to explode. 8-25