2007 Yamaha Motorsports Attak GT Owners Manual - Page 75
2007 Yamaha Motorsports Attak GT Manual
Page 75 highlights
ESU01811 Changing the brake fluid Brake fluid replacement is necessary when the following components are replaced during the periodic maintenance or if they are damaged or leaking. a. All oil seals of the master cylinder and caliper cylinder b. The brake hose WARNING @ Make sure that the brake fluid and the above parts are replaced by a Yamaha dealer. @ ESU00183 Suspension The suspension can be adjusted to suit rider preference. A softer setting, for example, may provide greater rider comfort, while a harder setting may allow more precise handling and control over certain types of terrain or riding conditions. WARNING @ Be sure to have a Yamaha dealer make this adjustment. @ ESU02372 Adjusting the ski spring preload The spring preload can be adjusted by turning the spring preload adjuster 1. CD-11E Spring seat length* Preload a Length Standard Increased Harder Decreased → Softer Maximum Minimum 129.0 mm 119.0 mm 119.0 mm (5.08 in) (4.69 in) (4.69 in) ∗ The spring seat length changes approximately 1.5 mm (0.06 in) with each full turn of the adjuster. CAUTION: @ The left and right ski spring preload must be set to the same setting. Uneven settings can cause poor handling and loss of stability. @ 8-22