2006 Yamaha Motorsports SXVenom Owners Manual - Page 70

2006 Yamaha Motorsports SXVenom Manual

Get 2006 Yamaha Motorsports SXVenom PDF manuals and user guides View all 2006 Yamaha Motorsports SXVenom manuals

Page 70 highlights

A B 3. Pull up the dipstick and check that the oil is between the upper and lower levels. If not, add oil to the upper level. 2 Upper level 3 Lower level Drive chain oil: GL-3 75W or 80W È For models without reverse transmissions (SXV60) É For models with reverse transmissions (SXV60ER/VT60) CAUTION: @ Make sure that no foreign material enters the drive chain housing. @ 4. Install the dipstick and fit the loop 4 of the dipstick handle onto the projection 5 of the drive chain housing. Adjusting the chain tension 1. Loosen the locknut. 2. Turn the adjusting bolt clockwise until it is finger tight. 3. Hold the adjusting bolt in place while tightening the locknut. 1 Locknut 2 Adjusting bolt 8-16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
8-16
3. Pull up the dipstick and check that the oil is between
the upper and lower levels. If not, add oil to the upper
level.
2
Upper level
3
Lower level
È
For models without reverse transmissions
(SXV60)
É
For models with reverse transmissions
(SXV60ER/VT60)
CAUTION
:
@
Make sure that no foreign material enters the drive
chain housing.
@
4. Install the dipstick and fit the loop
4
of the dipstick
handle onto the projection
5
of the drive chain hous-
ing.
Adjusting the chain tension
1. Loosen the locknut.
2. Turn the adjusting bolt clockwise until it is finger tight.
3. Hold the adjusting bolt in place while tightening the
locknut.
1
Locknut
2
Adjusting bolt
A
B
Drive chain oil:
GL-3
75W or 80W