2006 Yamaha Motorsports Rhino 450 Auto. 4x4 Owners Manual - Page 100
2006 Yamaha Motorsports Rhino 450 Auto. 4x4 Manual
Page 100 highlights
EVU00721 Differential gear oil Checking the differential gear oil level 1. Place the vehicle on a level surface. 2. Remove the differential gear oil filler bolt and check the oil level. It should be up to the brim of the filler hole. If the level is low, add sufficient oil of the recommended type to raise it to the specified level. CAUTION: _ Be sure no foreign material enters the differential gear case. _ 3. Install the differential gear oil filler bolt, and then tighten it to the specified torque. Tightening torque: Differential gear oil filler bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) Changing the differential gear oil 1. Place the vehicle on a level surface. 2. Place a container under the differential gear case to collect the used oil. 3. Remove the differential gear oil filler bolt and differential gear oil drain bolt to drain the oil. 1. Differential gear oil filler bolt 2. Correct oil level 3. Differential gear oil 8-15