2005 Yamaha Motorsports RX-1 ER Owners Manual - Page 81
2005 Yamaha Motorsports RX-1 ER Manual
Page 81 highlights
ESU01973 Rear suspension full rate adjustment For RXW10/RXW10S The total suspension spring rate and damping characteristics can be adjusted by changing the installed position of the shock absorber. WARNING @ Be sure to have a Yamaha dealer make this adjustment. @ CD-07E Installation position Spring rate and damping Standard S Soft M Medium M H Hard NOTE: @ Be sure to make this adjustment when there is no load (rider or cargo) on the snowmobile. @ 1. Loosen the full rate adjusting nut 1 1/2 or 3/4 turn, while holding the adjusting bolt 2 securely with a wrench so it does not move. CAUTION: @ Never allow the adjusting bolt 2 to move while loosening the nut. @ 2. Turn the adjusting bolt 2 to the desired position. CAUTION: @ Make sure that the adjusting bolt ends are set at the same position on each side. @ 3. While holding the adjusting bolt securely, tighten the full rate adjusting nut 1. Full rate adjusting nut tightening torque: 49 Nm (4.9 m·kgf, 35.4 ft·lb) CAUTION: @ Never allow the adjusting bolt to move while tightening the nut. @ 8-26