2005 Yamaha Motorsports RX-1 ER Owners Manual - Page 77
2005 Yamaha Motorsports RX-1 ER Manual
Page 77 highlights
WARNING @ This shock absorber contains highly pressurized nitrogen gas. It could explode by improper handling, causing injury or property damage. G Do not tamper with or attempt to open the shock absorber. G Do not subject the shock absorber to an open flame or other high heat source, which could cause it to explode. G Do not deform or damage the shock absorber in any way. G Do not dispose of a worn or damaged shock absorber by yourself. Take the unit to a Yamaha dealer. @ ESU04041 A Rear suspension spring preload adjustment The rear suspension spring preload can be adjusted by turning the spring preload adjuster 1 on the shock absorber (RX10/RX10R/RX10RS) or each shock absorber (RX10M/RX10MS/RXW10/RXW10S). For RX10/RX10R/RX10RS CD-26E Spring adjuster position Preload È Standard 1 Soft 2 3 4 4 5 6 7 Hard NOTE: @ The rear suspension spring preload can be further adjusted by changing the position of the spring seat. Have a Yamaha dealer make this adjustment as it requires special tools. @ B For RXW10/RXW10S CD-17E Spring seat length* Preload É a Length (front) Standard Increased Harder Decreased → Softer Maximum Minimum 122.6 mm 112.6 mm 112.6 mm (4.83 in) (4.43 in) (4.43 in) ∗ The spring seat length changes approximately 1.5 mm (0.06 in) with each full turn of the adjuster. 8-22