2005 Yamaha Motorsports Bruin 250 Owners Manual - Page 113
2005 Yamaha Motorsports Bruin 250 Manual
Page 113 highlights
8. Clean the oil strainer and oil filter element with solvent. 9. Check the O-ring for damage and replace it if necessary. NOTE: Make sure the O-ring is seated properly. _ _ CAUTION: _ Before installing the engine oil drain bolt, be sure to install the O-ring, compression spring and oil strainer. _ 10. Install the oil filter element. 11. Install the oil filter element cover by installing the bolts, and then tightening them to the specified torque. Tightening torque: Oil filter element cover bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 12. Install the oil strainer, compression spring, O-ring and engine oil drain bolt, and then tighten the engine oil drain bolt to the specified torque. Tightening torque: Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31 ft·lbf) 13. Add the specified amount of the recommended engine oil, then install and tighten the engine oil filler cap. Recommended engine oil: See page 10-2. Oil quantity: Without oil filter element removal: 1.50 L (1.32 Imp qt, 1.59 US qt) With oil filter element removal: 1.60 L (1.41 Imp qt, 1.69 US qt) 8-10