2004 Yamaha Motorsports Mountain Max 700 Owners Manual - Page 81
2004 Yamaha Motorsports Mountain Max 700 Manual
Page 81 highlights
ESU01971 Rear suspension full rate adjustment The total suspension spring rate and damping characteristics can be adjusted by changing the installed position of the shock absorber. WARNING @ Be sure to have a Yamaha dealer make this adjustment. @ CD-07E Installation position Spring rate and damping Standard S Soft M Medium M H Hard NOTE: @ Be sure to make this adjustment when there is no load (rider or cargo) on the snowmobile. @ 1. Loosen the full rate adjusting nut 1 1/2 or 3/4 turn, while holding the adjusting bolt 2 securely with a wrench so it does not move. CAUTION: @ Never allow the adjusting bolt 2 to move while loosening the nut. @ 2. Turn the adjusting bolt 2 to the desired position. CAUTION: @ Make sure that the adjusting bolt ends are set at the same position on each side. @ 3. While holding the adjusting bolt securely, tighten the full rate adjusting nut 1. Full rate adjusting nut tightening torque: 49 Nm (4.9 m·kgf, 35.4 ft·lb) CAUTION: @ Never allow the adjusting bolt to move while tightening the nut. @ 8-24