2003 Yamaha Motorsports Vino Classic Owners Manual - Page 45

2003 Yamaha Motorsports Vino Classic Manual

Get 2003 Yamaha Motorsports Vino Classic PDF manuals and user guides View all 2003 Yamaha Motorsports Vino Classic manuals

Page 45 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR 2. Place the scooter on the centerstand. 3. Place an oil pan under the final transmission case to collect the used oil. 4. Remove the oil filler cap and drain bolt to drain the oil from the final transmission case. 5. Install the final transmission oil drain bolt, and then tighten it to the specified torque. Tightening torque: Final transmission oil drain bolt: 18 Nm (1.8 m·kgf, 13 ft·lbf) 6. Add the specified amount of the recommended final transmission oil, and then install and tighten the oil filler cap. Recommended final transmission oil: See page 8-1. Oil quantity: 0.11 L (0.1 Imp qt, 0.12 US qt) w EWA00062 1 8 Make sure that no foreign material enters the final transmission case. 8 Make sure that no oil gets on the tire or wheel. 7. Check the final transmission case for oil leakage. If oil is leaking, check for the cause. 2 1. Final transmission oil filler bolt 2. Final transmission drain bolt EAU04228 Final transmission oil The final transmission case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the scooter. In addition, the final transmission oil must be changed as follows at the intervals specified in the periodic maintenance and lubrication chart. 1. Start the engine, warm it up by riding the scooter for several minutes, and then stop the engine. 6 6-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
6-7
PERIODIC MAINTENANCE AND MINOR REPAIR
6
EAU04228
Final transmission oil
The final transmission case must be
checked for oil leakage before each
ride. If any leakage is found, have a
Yamaha dealer check and repair the
scooter. In addition, the final trans-
mission oil must be changed as fol-
lows at the intervals specified in the
periodic maintenance and lubrication
chart.
1. Start the engine, warm it up by
riding the scooter for several
minutes,
and
then
stop
the
engine.
2
1
1.
Final transmission oil filler bolt
2.
Final transmission drain bolt
EWA00062
w
8
Make sure that no foreign
material enters the final trans-
mission case.
8
Make sure that no oil gets on
the tire or wheel.
7. Check
the
final
transmission
case for oil leakage. If oil is leak-
ing, check for the cause.
2.
Place the scooter on the center-
stand.
3. Place an oil pan under the final
transmission case to collect the
used oil.
4. Remove the oil filler cap and
drain bolt to drain the oil from the
final transmission case.
5. Install the final transmission oil
drain bolt, and then tighten it to
the specified torque.
6.
Add the specified amount of the
recommended final transmission
oil, and then install and tighten
the oil filler cap.
Tightening torque:
Final transmission oil drain bolt:
18 Nm (1.8 m·kgf, 13 ft·lbf)
Recommended final transmission
oil:
See page 8-1.
Oil quantity:
0.11 L (0.1 Imp qt, 0.12 US qt)