2003 Yamaha Motorsports SXViper Mountain Owners Manual - Page 77
2003 Yamaha Motorsports SXViper Mountain Manual
Page 77 highlights
ESU00315 Control rod adjustment For SXV70/SXV70ER The weight transfer can be adjusted by turning the control rod adjusting nut 1. 1. Loosen the locknut 2 while holding the control rod adjusting nut 1. 2. To increase weight transfer, turn the adjusting nut in direction a. To decrease weight transfer, turn the adjusting nut in direction b. 3. Tighten the locknut. Locknut tightening torque: 25 Nm (2.5 m·kgf, 18.1 ft·lb) CAUTION: @ G G When using the two 22-mm wrenches included in the tool kit, make sure that they are situated at a right angle to the control rod as shown, and that they are tightly fitted to the locknut and the control rod adjusting nut. The left and right adjusting nuts must be set to the same position. Uneven settings can cause poor handling and loss of stability. @ WARNING @ Never adjust the control rods beyond the maximum range indicated on the rods with red paint 3. @ c Adjustable range d Standard position 8-23