2003 Yamaha Motorsports RX-1 Owners Manual - Page 81
2003 Yamaha Motorsports RX-1 Manual
Page 81 highlights
2. Loosen the handlebar bolts. 3. Move the handlebar up or down (± 7°) to adjust the handlebar height to the desired position. A B È RX10/RX10S/RX10R/RX10RS É RX10M/RX10MS CAUTION: @ Make sure that the projection on the handlebar is not installed into the area a shown. @ 4. Tighten the handlebar bolts and install the handlebar cover. Handlebar bolt tightening torque: 14.5 Nm (1.45 m·kgf, 10.5 ft·lb) CAUTION: @ Make sure that the small gap b side of the handlebar holders faces forward c. @ 8-29
8-29
2. Loosen the handlebar bolts.
3. Move the handlebar up or down (
±
7°) to adjust the
handlebar height to the desired position.
È
RX10/RX10S/RX10R/RX10RS
É
RX10M/RX10MS
CAUTION
:
@
Make sure that the projection on the handlebar is not
installed into the area
a
shown.
@
4. Tighten the handlebar bolts and install the handlebar
cover.
CAUTION
:
@
Make sure that the small gap
b
side of the handlebar
holders faces forward
c
.
@
A
B
Handlebar bolt tightening torque:
14.5 Nm (1.45 m·kgf, 10.5 ft·lb)