2003 Yamaha Motorsports Mountain Max 700 Owners Manual - Page 62
2003 Yamaha Motorsports Mountain Max 700 Manual
Page 62 highlights
CAUTION: @ Operating the engine with an improperly bled cooling system can cause overheating and severe engine damage. @ Coolant replenishment 1. Remove the coolant filler cap and pour the coolant to the proper level. 1 Coolant level 2 To coolant reservoir Recommended coolant: High quality ethylene glycol antifreeze containing corrosion inhibitors. Coolant and water mixing ratio: 60:40 Total amount: For MM700 3.9 L (3.43 Imp qt, 4.12 US qt) For VT700 4.0 L (3.52 lmp qt, 4.23 US qt) Coolant reservoir capacity: 0.28 L (0.25 Imp qt, 0.30 US qt) "LOW" to "FULL": 0.13 L (0.11 Imp qt, 0.14 US qt) 2. Start the engine and add coolant until the coolant level does not go down, and then stop the engine. 3. Remove the coolant reservoir cap. 4. Fill the coolant reservoir with coolant to "FULL" 3. 5. Install the coolant filler and coolant reservoir caps. Check for any coolant leakage. NOTE: @ If you find any leaks, consult a Yamaha dealer. @ 8-11