2002 Yamaha Motorsports SRX700 Owners Manual - Page 61
2002 Yamaha Motorsports SRX700 Manual
Page 61 highlights
7. Tighten each adjusting bolt. Adjusting bolt tightening torque: 10 Nm (1.0 m·kgf, 7.2 ft·lb) 8. Install the V-belt over the primary sheave assembly. 9. Rotate the secondary sliding sheave clockwise 6 and push 7 it so that it separates from the secondary fixed sheave. 10. Install the V-belt 8 between the secondary sliding and secondary fixed sheaves. 11. Install the drive guard. WARNING @ Never run the engine with the V-belt or drive guard removed. @ 8-14
8-14
7. Tighten each adjusting bolt.
8. Install the V-belt over the primary sheave assembly.
9. Rotate the secondary sliding sheave clockwise
6
and push
7
it so that it separates from the secondary
fixed sheave.
10. Install the V-belt
8
between the secondary sliding
and secondary fixed sheaves.
11. Install the drive guard.
WARNING
@
Never run the engine with the V-belt or drive guard
removed.
@
Adjusting bolt tightening torque:
10 Nm (1.0 m·kgf, 7.2 ft·lb)