2002 Yamaha Motorsports SRX700 Owners Manual - Page 59
2002 Yamaha Motorsports SRX700 Manual
Page 59 highlights
2. Start the engine and add coolant until the coolant level does not go down, and then stop the engine. 3. Fill the coolant reservoir with coolant to the "COLD LEVEL" mark. 4. Install the coolant reservoir cap. Check for any coolant leakage. NOTE: @ If you find any leaks, consult a Yamaha dealer. @ ESU00166 V-belt replacement WARNING @ When installing the new V-belt, make sure it is positioned from 1.5 mm (0.06 in) above the edge of the secondary sheave assembly to 0.5 mm (0.02 in) below the edge a. If not, the V-belt clutch engagement speed will be changed. The snowmobile may move unexpectedly when the engine is started. Adjust the V-belt position by removing or adding a spacer 1 on each adjusting bolt. Have a Yamaha dealer make this adjustment. @ CAUTION: @ As the V-belt wears, adjustment may be necessary. To ensure proper clutch performance, the V-belt position should be adjusted by adding a spacer on each adjusting bolt when the V-belt position reaches 1.5 mm (0.06 in) below the edge. Have a Yamaha dealer make this adjustment. @ CD-05E New belt width Belt wear limit width 34.5 mm (1.36 in) 32.5 mm (1.28 in) NOTE: @ Apply the parking brake before replacing the V-belt. @ 1. Remove the drive guard. 8-12