2002 Yamaha Motorsports Mountain Max 600 Owners Manual - Page 80
2002 Yamaha Motorsports Mountain Max 600 Manual
Page 80 highlights
3. Move the handlebar up or down (± 7°) to adjust the handlebar height to the desired position. A È MM600 É SX600 B CAUTION: @ Make sure that the projection on the handlebar is not installed into the area a shown. @ 4. Tighten the handlebar bolts and install the handlebar cover. Handlebar bolt tightening torque: 23 Nm (2.3 m·kgf, 17 ft·lb) CAUTION: @ Make sure that the small gap b side of the handlebar holders faces forward c. @ 8-28
8-28
3. Move the handlebar up or down (
±
7°) to adjust the
handlebar height to the desired position.
È
MM600
É
SX600
CAUTION
:
@
Make sure that the projection on the handlebar is not
installed into the area
a
shown.
@
4. Tighten the handlebar bolts and install the handlebar
cover.
CAUTION
:
@
Make sure that the small gap
b
side of the handlebar
holders faces forward
c
.
@
A
B
Handlebar bolt tightening torque:
23 Nm (2.3 m·kgf, 17 ft·lb)