2012 Volvo S60 Owner's Manual - Page 308
2012 Volvo S60 Manual
Page 308 highlights
08 Maintenance and specifications Replacing bulbs Removing the cover to access the bulbs Reinstall the cover in the reverse order. High beam, Halogen Low beam, Halogen NOTE Before starting to replace a bulb, see page 306. 1. Remove the headlight housing from the vehicle (see page 306). 1. Remove the headlight housing from the vehicle (see page 306). 2. Remove the cover over the bulbs (see page 308). 3. Unplug the connector from the bulb. 4. Remove the bulb by pulling it straight out. 5. The guide lug on the new bulb should be straight up when the bulb is inserted into the holder and the bulb should snap into place. 6. Put the cover back into position and reinstall the headlight housing. 2. Remove the cover over the bulbs (see page 308). 3. Remove the bulb by turning it counterclockwise and pulling it straight out. 4. Remove the connector from the bulb. 5. Press the new bulb into the socket and turn it clockwise to put it in place. It can only be secured in one position. 6. Reinsert the bulb holder into the headlight housing. 7. Put the cover back into position and reinstall the headlight housing. 1. Loosen the cover's four retaining screws with the tool (1) provided in the vehicle's tool kit (see page 290). The screws should not be removed completely. CAUTION 08 Use the tool from the vehicle's tool kit to loosen the screws. A screwdriver or other sharp object could scratch the headlight. 2. Push the cover to the side. 308