2010 Volvo XC90 Owner's Manual - Page 217

09 Maintenance and servicing Replacing bulbs When replacing bulbs, keep the following points in mind: 09 Replacing high/low beams/turn signal/ parking light bulbs WARNING To lift out the lamp housing: 1. Switch off the ignition. 2. Open the hood. 3. Pull up the retaining pins (see the illustration). 4. Lift out the lamp housing. • Never touch the glass of bulbs with your fingers. Grease and oils from your fingers vaporize in the heat and will leave a deposit on the reflector, which will damage it. • • The engine should not be running when changing bulbs. When changing in the headlight housing, if the engine has been running just prior to replacing bulbs, please be aware that components in the engine compartment will be hot. • The optional Active Bending Light bulbs contain trace amounts of mercury. These bulbs should always be disposed of by an authorized Volvo retailer. The following bulbs should only be replaced by a trained and qualified Volvo service technician: • High-mounted brake lights WARNING G027081 The entire lamp housing must be lifted out when replacing these bulbs. Active Bending Lights* - due to the high voltage used by these headlights, these bulbs should only be replaced by a trained and qualified Volvo service technician. G027083 Active Bending Lights Courtesy (dome) lighting Reading lights Glove compartment lights Turn signals and courtesy lights in the side door mirrors `` * Option/accessory, for more information, see Introduction. 217