2009 Volvo XC90 Owner's Manual - Page 73

02 Instruments and controls Cruise control Engaging the cruise control function Increasing or decreasing speed Braking • Cruise control is automatically disengaged when the brake pedal is depressed. The currently set speed is stored in memory. 02 • Pressing resume Acceleration will return the vehicle to the previously set speed. G027098 G027139 Momentary acceleration, such as when passing another vehicle, does not affect cruise control operation. The vehicle will automatically return to the previously set speed when you release the accelerator pedal. Disengaging cruise control To disengage cruise control, press the CRUISE button. CRUISE or CRUISE-ON will no longer be displayed in the information window in the instrument panel. The cruise control panel is located on the left side of the steering wheel hub. Use + or - in the following ways to increase or decrease the vehicle's speed: 1. Press and hold down + or - until the vehicle reaches the desired speed. 2. Press + or - for approximately a half second and release the button to increase or decrease vehicle speed by approximately 1 mph (1.6 km/h). NOTE This does not set the vehicle's speed. NOTE Cruise control is automatically disengaged if: 1. Press the CRUISE button. > CRUISE will be displayed in the information window in the instrument panel. 2. Press + or - to set the current speed. > CRUISE-ON will be displayed in the information window in the instrument panel. NOTE Cruise control will not function at speeds below 20 mph. (30 km/h). the engine is switched off the gear selector is placed in (N) Neutral the wheels start to spin or lock if an increase in speed is maintained for more than one minute if the vehicle's speed falls below approximately 20 mph (30 km/h). 73