2010 Pontiac Vibe Owner's Manual - Page 209
2010 Pontiac Vibe Manual
Page 209 highlights
Vehicle Care How to Check Windshield Washer Fluid Adding Washer Fluid • Do not mix water with 9-25 ready-to-use washer fluid. Water can cause the solution to freeze and damage your washer fluid tank and other parts of the washer system. Also, water does not clean as well as washer fluid. Open the cap with the washer symbol on it. Add washer fluid until the holes of the dipstick are filled between the LOW (B) and NORMAL (A). See Engine Compartment Overview on page 9-6 for reservoir location. Notice: • Fill the washer fluid tank only three-quarters full when it is very cold. This allows for fluid expansion if freezing occurs, which could damage the tank if it is completely full. To check windshield washer fluid. 1. Pull dipstick out of windshield washer reservoir. 2. Washer fluid should fill the holes between the LOW (B) and NORMAL (A) mark. 3. If the fluid reads LOW (B) add fluid. • Do not use engine coolant (antifreeze) in your windshield washer. It can damage the vehicle's windshield washer system and paint. • When using concentrated washer fluid, follow the manufacturer's instructions for adding water.