2010 Pontiac Vibe Owner's Manual - Page 150

8-16 Driving and Operating • Avoid making hard stops for the first 200 miles (322 km) or so. During this time the new brake linings are not yet broken in. Hard stops with new linings can mean premature wear and earlier replacement. Follow this breaking-in guideline every time you get new brake linings. Starting and Operating New Vehicle Break-In Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: Ignition Positions The ignition switch has four different positions. To shift out of P (Park), turn the ignition to ON/RUN and apply the brake pedal. • Do not drive at any one constant speed, fast or slow, for the first 500 miles (805 km). Do not make full-throttle starts. Avoid downshifting to brake or slow the vehicle. • Do not tow a trailer during break-in. See Trailer Towing on page 8-48 for the trailer towing capabilities of the vehicle and more information. Following break-in, engine speed and load can be gradually increased. Notice: Using a tool to force the key to turn in the ignition could cause damage to the switch or break the key. Use the correct key, make sure it is all the way in, and turn it only with your hand. If the key cannot be turned by hand, see your dealer/retailer.