1999 Pontiac Grand Am Owner's Manual - Page 96

yellowblue Windshield Wipers For steady wiping at low speed, move the stalk up to the LO position. For high-speed wiping, move the stalk up further, to HI. To stop the wipers, move the stalk to OFF. You can set the wiper speed for a long or short delay between wipes. This can be very useful in light rain or snow. Move the stalk to INT, then rotate the inner band, labeled INT ADJ, and choose the delay you want. Rotate the inner band up for shorter delay times between wiper cycles. Rotate the band down for a longer delay time between wiper cycles. Remember that damaged wiper blades may prevent you from seeing well enough to drive safely. To avoid damage, be sure to clear ice and snow from the wiper blades before using them. If they're frozen to the windshield, carefully loosen or thaw them. If your blades do become damaged, get new blades or blade inserts. Heavy snow or ice can overload your wiper motor. A circuit breaker will stop the motor until it cools. Clear away snow or ice to prevent an overload. You control the windshield wipers by moving the stalk with the wiper symbol on it up or down. For a single wiper cycle, push the stalk down to MIST, then release it. For more cycles, hold the stalk down longer. 2-32