2014 Polaris 600 INDY Owners Manual - Page 97
2014 Polaris 600 INDY Manual
Page 97 highlights
MAINTENANCE Clutch System Drive Belt Condition Periodically check the condition and tension of the drive belt. Inspect the belt for signs of excessive wear: frayed edges, missing cogs, cracks and excessive looseness. Replace the belt if any of these conditions exist. See Drive Belt Troubleshooting on page 115. Always carry a spare drive belt. Store the spare belt in the belt clip located under the left side of the hood. For improved drive-away during extremely cold temperatures, remove the belt and warm it to room temperature. Reinstall it before starting the snowmobile. Drive Belt Deflection Measure belt deflection with both clutches at rest and in their full neutral position. Place a straight edge (1) on the belt and apply downward pressure while measuring at point 2. This measurement should be 1 1/4 inches (3.2 cm). 2 1 Drive Belt Adjustment 1. Loosen the 7/16-inch jam nut on the belt width adjuster. 2. Using a 1/8-inch Allen wrench, turn the set screw inward (clockwise) to increase the distance between the sheaves or outward (counter-clockwise) to decrease the distance. 3. Tighten the jam nut. 95