2014 Polaris 600 INDY Owners Manual - Page 56
2014 Polaris 600 INDY Manual
Page 56 highlights
THE PERFECT FIT Handlebar Adjustments Handlebar Position (if equipped) 1. Loosen the four bolts on the bottom of the adjuster block. If necessary, pry the blocks apart with a screwdriver. 2. Adjust the handlebar forward or rearward to the desired position. 3. Tighten the bolts. Loosen top bolts to adjust handlebar angle Handlebar Angle 1. Loosen the four bolts on the top of the adjuster block. If necessary, pry the blocks apart with a screwdriver. 2. Adjust the handlebar forward or rearward to the desired angle. Be sure handlebars, brake lever Loosen bottom bolts to and throttle lever operate adjust handlebar position smoothly and do not hit the gas (if equipped) tank, windshield or any other part of the machine when turned fully to the left or right. If necessary, loosen the set screws for the left and right controls, rotate the controls slightly, then tighten the set screws to the proper torque. NOTICE: Do not stretch wires while adjusting the controls. Stretching the wires could damage the handwarmers. • Right control torque: 27 in. lbs. (3.05 Nm) +/- 10%. • Left control torque: 24 in. lbs. (2.7 Nm) +/- 10%. 3. Tighten the bolts. 54