2012 Polaris RZR Owners Manual - Page 131
2012 Polaris RZR Manual
Page 131 highlights
TROUBLESHOOTING Drive Belt Wear/Burn Possible Cause Driving onto a pickup or tall trailer in high range Starting out going up a steep incline Driving at low RPM or ground speed (3-7 MPH) Insufficient warm-up at low ambient temperatures Solution Use low range during loading. Use low range. See warnings on page 60. Drive at a higher speed or use low range more frequently. Warm the engine at least 5 minutes. With the transmission in neutral, advance the throttle to about 1/8 throttle in short bursts, 5 to 7 times. The belt will become more flexible and prevent belt burning. Slow/easy clutch engage- Use the throttle quickly and effectively. ment Towing/pushing at low Use low range only. RPM/low ground speed Utility use/plowing Use low range only. Stuck in mud or snow Shift the transmission to low range and carefully use fast, aggressive throttle application to engage clutch. WARNING: Excessive throttle may cause loss of control and vehicle overturn. Climbing over large Shift the transmission to low range and carefully use fast, objects from a stopped brief, aggressive throttle application to engage clutch. position WARNING: Excessive throttle may cause loss of control and vehicle overturn. Belt slippage from water Dry out the PVT (see page 94). Prevent water from enteror snow ingestion into the ing the PVT outlet duct (see page 116). Inspect clutch PVT system seals for damage if repeated leaking occurs. Clutch malfunction See your POLARIS dealer. Poor engine performance Check for fouled plugs or foreign material in gas tank or fuel lines. See your dealer. Slippage from failure to Always warm up the belt by operating below 30 mph for warm up belt one mile (5 miles or more when temperature is below freezing). Wrong or missing belt Install the recommended belt. Improper break-in Always break in a new belt and/or clutch. See page 50. 127