2012 Polaris Phoenix 200 Owners Manual - Page 69
2012 Polaris Phoenix 200 Manual
Page 69 highlights
MAINTENANCE Toe Alignment Use the following procedure to check the toe alignment of the vehicle. The recommended toe alignment is 1/8" to 1/4" (3-6 mm) toe out. WARNING! Severe injury or death can result from improper toe alignment and adjustment. Do not attempt to adjust tie rod alignment. All tie rod adjustments should be performed by an authorized POLARIS dealer. 1. Position the vehicle on a level surface. 2. Set the handlebars in a straight-ahead position and secure them in this position. 3. Place a chalk mark on the 2 center line of the front tires approximately 10" (25.4 cm) from the floor, 1 or as close to the hub/axle center line as possible. Make sure both marks are the same distance from the floor. 4. Measure the distance between the marks and record the measurement (1). 5. Move the vehicle until the chalk marks are at the rear of the tires, even with the hub/axle center line. 6. Measure the distance between the marks and record the measurement (2). 7. Subtract measurement 2 from measurement 1. The difference is the vehicle toe-out alignment. 8. If you discover improper alignment, see your POLARIS dealer for service. 64